Edge ED7800 Specifications download pdf (Page 36)

Electrified Exit Devices

ED5000.36

ED5000 Series Pushpad Exit Devices

Activation

Alarm is armed by turning key

clockwise. Low audible chirp indicates

alarm has been activated. Alarm will

sound when the exit device pushpad is

depressed. Factory preset for standard

alarm mode which automatically resets

after 5 minutes.

Continuous Alarm Mode

Alarm sounds continuously when the

exit device pushpad is depressed. Alarm

must be manually reset by keyswitch.

(This feature is selected by a switch on

the circuit board.)

Low Battery Warning

Audible chirp. Every 30 seconds.

Warning Decal

“EMERGENCY EXIT-ALARM WILL

SOUND” provided.

Nuisance Alarm

Units are factory preset for instant

alarm. Selectable feature for alarm to

sound when exit device touchbar is

depressed for more than 2 seconds.

(This feature is selected by a switch on

the circuit board.)

Kit

Available in kit form for field retrofit.

Order ED50AK.

Arming Delay/Authorized Egress

A 10-second delay (after arming)

permits egress (by turning key

clockwise).

Alarm Shunt

Ingress shunt alarm input for devices

with signal & outside trim monitors

(M91 & M93).

Power Requirements

One 9-volt battery (included).

Alarm Strength

90db @ 10 feet.

Arm/Disarm

Requires one 1-1/8" straight cam

mortise cylinder. Clockwise turn arms

the alarm, counterclockwise turn

disarms or silences the alarm. Low

audible chirp indicates alarm has been

activated.

Device Status

A Red LED indicator will illuminate

every 30 seconds when the alarm is

armed.

Tamper Resistant

Built-in safety monitor sounds alarm

when tampering occurs.

Cylinders

Cylinder not included unless specified.

See Quick Codes, page 50.

Door Width

Available for 36"-48" devices only. Not

available with devices less than 36".

Quick Code

M61

Alarm Kit

ED50AK

Exceptions

The ED50AK for the ED5000 series exit

devices cannot be retrofitted in the field

to the ED5400/5470 series surface

vertical rod exit devices.

The alarm option is available for the

surface vertical rod devices by factory

order only. To order, add the quick

code suffix M61 to the device number;

for example, ED5470 x M61.

Please note, in accordance with Corbin

Russwin’s standard limited warranty,

any attempt to retrofit the ED50AK to a

surface vertical rod exit device will void

the warranties for these products.

Surface vertical rod exit devices with

alarm kit cannot be ordered with M91,

M92 or M93.

How to Order

Ordering example for Exit Device

ED5400 626 M61

Device Finish Quick Code

for Alarm Option

(Cylinder Not

Included)

Ordering Example for Alarm Kit Only

ED50AK 626 W048

Alarm Finish Door

Kit Width

(Cylinder Not

Included)

NOTE: Dogging not available with M61

option and ED50AK alarm kit.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Comments to this Manuals

No comments